OVERSPEED PROTECTION SYSTEM AND METHOD
Wind power generation overspeed control system
An overspeed protection system for a wind turbine having a hub and at least one rotor blade mounted to the hub includes a rotation sensor adapted for measuring a rotor speed of said wind turbine; a comparator connected to the rotation sensor and adapted for comparing the measured rotor speed with a predetermined threshold value of the rotor speed wherein the comparator outputs a signal indicative of the comparison; and an auxiliary pitch drive controller connected to the comparator and adapted to receive the signal indicative of the comparison, the auxiliary pitch drive controller being further adapted for controlling a pitch drive unit of the wind turbine independently of a main turbine controller and, if the threshold value is exceeded, to adjust a pitch angle of the rotor blade of the wind turbine so that aerodynamic braking of the wind turbine is effected. [pdf]
Outdoor battery cabinet protection standards
This guide explores IP ratings, cooling strategies, materials, fire protection, and long-term cost considerations to help you avoid common pitfalls and choose with confidence. The role of a cabinet extends beyond weather protection. [pdf]FAQS about Outdoor battery cabinet protection standards
How do you know if a battery enclosure is safe?
Two common methods of measuring the quality of protection offered by battery enclosures are the Ingress Protection Rating and the NEMA rating. IP and NEMA ratings are similar yet different; the NEMA code of protection can be said to be equivalent to the IP rating, but the same does not hold true for the IP rating.
Can a battery enclosure be mounted on a pole or wall?
Smaller battery enclosures can be mounted on a pole or a wall. Usually up to 300-400 lbs, larger enclosures are placed on the ground, slab, or foundation. Practical limitations usually prevent too many batteries or too much weight from being installed on the pole or wall. Larger ground mount enclosures usually do not have any limits.
Do I need a separate battery enclosure?
In most industrial applications, if the batteries are installed in a dedicated space, a separate enclosure is not required. Outdoor enclosures should be rated Nema 3R to prevent water intrusion into the enclosure. Filters and screens can be added to prevent dust and insect intrusion.
What is a battery energy storage system?
Battery energy storage systems (BESS) stabilize the electrical grid, ensuring a steady flow of power to homes and businesses regardless of fluctuations from varied energy sources or other disruptions. However, fires at some BESS installations have caused concern in communities considering BESS as a method to support their grids.
Should a battery enclosure be vented?
In general, all battery enclosures should be vented. This includes VRLA batteries, as hydrogen gas could potentially build up in a fault condition (e.g. controller failure). Passive venting should be adequate and active venting, like a fan, should only be required in rare cases.
What is a good rated outdoor enclosure?
Outdoor enclosures should be rated Nema 3R to prevent water intrusion into the enclosure. Filters and screens can be added to prevent dust and insect intrusion. Powder-coated enclosures fabricated from aluminum can help prevent corrosion, further lengthening the battery's lifespan.
